Siemens motor electric hoist system heavy durable long service time
The 1LG0 series of 3 phase asynchronous motors are Totally Enclosed Fan Cooled (TEFC) with IP55 environmental protection. These motors are designed and manufactured in accordance with ISO, IEC standards, GB standards.
Terminal boxes are top-mounted as default on the motor. This box can be rotated by 4 X 90º to allow for cable entry from each direction. In addition, the terminal box can be installed either on the Left Hand Side (LHS – code K10) or Right Hand Side (RHS – code K09) when viewed from the drive end (DE) side of the motor.
Reliable quality and performance
To ensure reliable and long life, the 1LG0 windings are made of materials with class F temperature rise limited to class B (80K)
Voltage and Frequency
1LG0 standard motor will operate on mains power supplies in accordance with IEC 60034-1 Category A (combination of voltage deviation ±5 % and frequency deviation ±2 %) for voltage and frequency ﬂ uctuations.
1LG0 rated output power refers to continuous duty (S1) operation in accordance with IEC 60034-1 when operated at 40ºC ambient temperature and at site altitudes of 1000m or less.
1LG0 current overload is in accordance with IEC 60034-1 (1.5 times for 2 minutes) when operated as per the rated name plate data.
Suitable for IP55 installations
Below or equal to1000m above sea level
Operating temperature between -20ºC and 40ºC
1. Is your product customized?
Yes, because the working condition are different, all our products are customized depending on detail requirement! So all your products will be specially designed by our engineers according to your workshop conditions.
2. Can you supply the quality certification?
Yes, all kinds of certification are available, if you have doubt, you can come to our factory and test it by yourself,or you can let some third-partied to do the inspection for you.
3. Does your workshop have products in stock?
Yes, we have. But we only have the standard-sized products, if you need customized products, then it will take some time to manufacture it.
4. How many days it will need for you to deliver the products?
It depends on your products quantity and products data you given, but we will try our best to deliver your products as soon as possible.
5. How can I install the crane?
We will sent you the detail installation manual or if you are needing, our installation engineers can come to your workshop to guide the installation.
6. Can I have a visit to your factory?
You can come to our factory anytime when you are convenient. We will make arrangement to pick you up.